Tips and Best Practices

Use Spray Tip

Use Spray Tip when applying to shoes and gear.

Make sure you apply in area where overspray can be captured or cleaned up.

Applying outside with no wind, or inside garage with a drop cloth are ideal.

Use Squirt Tip

Use Squirt Tip for applying to Clean Dry Clothing like Shirts, Shoes, Socks.

Easy to mix and apply in Clean Sink.

How much InvisiArmor Sport do i typically need.

1 16 ounce Batch of InvisiArmor DE-Stink Treatment can typically Treat the following

Description # of Items
Cotton T-Shirt 1-2
Dry-Fit Shirt 2-3
Jersey 1-2
Synthetic shirt, shorts, pair of socks 1-2
Pair of Shoes 2
Pair of Heavy Gloves 2
Pair of Light Gloves 4
Football Gear – Pads ect. 1
Hockey Gear Pads ect. 1
Lacrosse Gear Pads ect. 1
Lightweight workout gi, top and bottom 1
Canvas dress gi, top only 1
Canvas dress gi, bottom only 1

Treating New Shoes & Gear

Apply InvisiArmor DE-Stink Treatment to KEEP Shoes Clean & Fresh. About 4oz per shoe.

  1. Follow Instructions on back of bottle to mix InvisiArmor Sport with 3% Hydrogen Peroxide
  2. Spray soles of shoes (top & bottom) with InvisiArmor Treatment.
  3. Spray and Soak the inside of the shoe working InvisiArmor Sport into the fabric and foam of the shoe.
  4. Also spray outside of shoes with DE-Stink Treatment.
  5. Let Shoes Air Dry.

Treating old Shoes & Gear

PART 1 is best practice for BAD SMELLING Shoes/Gear.  Part 2 is normal application Shoes/Gear.


Part 1 – OLD SHOES — Follow If Shoes Smell Bad (Pre-Treat with 3% Hydrogen Peroxide)

REQUIRES ABOUT 16 OUNCES OF STRAIGHT 3 % HYDROGEN PEROXIDE.

  1. Remove soles from shoes.
  2. Remove dirt and grime from soles and inside of shoes.
  3. Pour 3% Hydrogen Peroxide directly into shoe to saturate inside of shoe.

Foaming will occur – cleaning in progress.

  1. Soak soles of shoes in 3% Hydrogen Peroxide.
  2. Dry shoes and soles of shoes.  Air drying is best.
  3. Wash shoes and soles in washing machine or by hand to thoroughly rinse and remove dirt and germs.

DO NOT USE BLEACH.  You may use detergent or soap.

 

Part 2 – NEW SHOES — Apply InvisiArmor DE-Stink Treatment to KEEP Shoes Clean & Fresh. About 4oz per shoe.

  1. Follow Instructions on back of bottle to mix InvisiArmor Sport with 3% Hydrogen Peroxide
  2. Spray soles of shoes (top & bottom) with InvisiArmor Treatment.
  3. Spray and Soak the inside of the shoe working InvisiArmor Sport into the fabric and foam of the shoe.
  4. Also spray outside of shoes with DE-Stink Treatment.
  5. Let Shoes Air Dry.